Demiurg RFID Readers

   

125 kHz Readers

Demiurg's RFID 125 kHz readers are dedicated for contactless reading of identification data from passive transponders (cards, tags, etc.). After the positive verification of parity bits, collected data (manufacturer’s code and serial number) are sent with one of three available interfaces: 1-Wire, RS232 or Wiegand26. Some readers include an LED diode to a device with the configuration of common anode or common cathode.

Comparison guide to all Demiurg 125 kHz RFID Readers

Reader 1-Wire RS-232 Common
Cathode
Common
Anode
LED Side
Output
Fastening
1W-H5-05-M12 X - - X R/G - M12
1W-H3-05 M12 X - - X R/G - M12
1W-H3-05K M12 X - X - R/G - M12
1W-H3-05 X - - X R/G - Glue
1W-H3-05K X - X - R/G - Glue
1W-H3-03 X - - X - - Glue
RS-H3-05 - X - X R/G - Glue
RS-H3-05K - X X - R/G - Glue
RS-H3-05 M12 - X - X R/G - M12
RS-H3-05K M12 - X X - R/G - M12
1W-H3-04P X - - X R X Glue
1W-H3-04KP X - X - R X Glue
1W-H3-05WR X - - X R/G - M12
1W-H3-05KWR X - X - R/G - M12
Demiurg 1W-H5-05-M12

Demiurg 1W-H5-05-M12

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • Mounted bicolor LED (red/green): common anode.
  • M12 thread for mounting purposes.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.

Demiurg product datasheet (PDF)

Demiurg product technical drawing (PDF)

Price: $13.44 each.   

Demiurg 1W-H3-05 M12 and 1W-H3-05K M12

Demiurg 1W-H3-05 M12 and 1W-H3-05K M12

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • Mounted bicolor LED (red/green): 1W-H3-05 M12 common anode; 1W-H3-05K M12 common cathode.
  • Low case with M12 thread.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.

Demiurg 1W-H3-05 M12 datasheet (PDF)
Demiurg 1W-H3-05K M12 datasheet (PDF)

Demiurg product technical drawing (PDF)

1W-H3-05 M12

Price: $13.44 each.  

1W-H3-05K M12

Price: $13.44 each.  

Demiurg 1W-H3-05 and 1W-H3-05K

Demiurg 1W-H3-05 and 1W-H3-05K

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • Mounted bicolor LED (red/green): 1W-H3-05, common anode; 1W-H3-05K, common cathode.
  • Designed to be mounted with glue.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.
  • Low casing.

Demiurg 1W-H3-05 datasheet (PDF)
Demiurg 1W-H3-05K datasheet (PDF)

Demiurg 1W-H3-05 technical drawing (PDF)

1W-H3-05

Price: $13.44 each.  

1W-H3-05K

Price: $13.44 each.  

Demiurg 1W-H3-03

Demiurg 1W-H3-03

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • In this model there is no LED diode.
  • Designed to be mounted with glue.
  • Standard cable length: 15.75 inches (40 cm), 3 wires.
  • Low casing.

Demiurg product datasheet (PDF)

Demiurg product technical drawing (PDF)

Price: $13.44 each.   

Demiurg RS-H3-05 and RS-H3-05K

Demiurg RS-H3-05 and RS-H3-05K

  • The data read from a transponder is transferred with RS-232 TTL interface. Standard transmission speed is 4800 bps. Modification to 9600 bps is available by special request. Contact us for more information.
  • Mounted bicolor LED (red/green): RS-H3-05, common anode; RS-H3-05K, common cathode.
  • Designed to be mounted with glue.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.
  • Low casing.

Demiurg product technical drawing (PDF)

RS-H3-05

Price: $13.44 each.  

RS-H3-05K

Price: $13.44 each.  

Demiurg RS-H3-05 M12 and RS-H3-05K M12

Demiurg RS-H3-05 M12 and RS-H3-05K M12

  • The data read from a transponder is transferred with RS-232 TTL interface. Standard transmission speed is 4800 bps. Modification to 9600 bps is available by special request. Contact us for more information.
  • Mounted bicolor LED (red/green):RS-H3-05 M12, common anode; RS-H3-05K M12, common cathode.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.
  • Low case with M12 thread.

Demiurg product technical drawing (PDF)

RS-H3-05 M12

Price: $13.44 each.  

RS-H3-05K M12

Price: $13.44 each.  

Demiurg 1W-H3-04P and 1W-H3-04KP

Demiurg 1W-H3-04P and 1W-H3-04KP

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • Built-in red LED: 1W-H3-04P, common anode; 1W-H3-04KP, common cathode.
  • Designed to be mounted with glue.
  • Side-conduction of the flat wire.
  • Standard cable length: 15.75 inches (40 cm), 4 wires.

Demiurg 1W-H3-04P datasheet (PDF)
Demiurg 1W-H3-04KP datasheet (PDF)

Demiurg 1W-H3-04P and 1W-H3-04KP technical drawing (PDF)

1W-H3-04P

Price: $13.44 each.  

1W-H3-04KP

Price: $13.44 each.  

Demiurg 1W-H3-05WR and 1W-H3-05KWR

Demiurg 1W-H3-05 WR and 1W-H3-05K WR

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • Mounted bicolor LED (red/green):
    • 1W-H3-05 WR: common anode
    • 1W-H3-05K WR: common cathode.
  • Low case with M12 thread.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.
  • Additional plastic casing provides special protection from interference with water.

Demiurg 1W-H3-05 WR datasheet (PDF)
Demiurg 1W-H3-05K WR datasheet (PDF)

Demiurg product technical drawing (PDF)

Price: $13.44 each.

1W-H3-05 WR

Price: $13.44 each.  

1W-H3-05K WR

Price: $13.44 each.  

13.56 MHz Readers

Comparison guide to all Demiurg 13.56 MHz RFID Readers

Reader 1-Wire RS-232 Common
Cathode
Common
Anode
LED Fastening
1W-H0-05 X - - X R/G Glue
1W-H0-05K X - X - R/G Glue
1W-H0-05 M12 X - - X R/G M12
1W-H0-05K M12 X - X - R/G M12
RS-H0-05 - X - X R/G Glue
RS-H0-05K - X X - R/G Glue
RS-H0-05 M12 - X - X R/G M12
RS-H0-05K M12 - X X - R/G M12
Demiurg 1W-H0-05 and 1W-H0-05K

Demiurg 1W-H0-05 and 1W-H0-05K

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • Mounted bicolor LED (red/green): 1W-H0-05, common anode; 1W-H0-05K, common cathode.
  • Designed to be mounted with glue.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.
  • Lower casing.

Demiurg product datasheet (PDF)
Demiurg product datasheet (PDF)

Demiurg product technical drawing (PDF)

1W-H0-05

Price: $20.17 each.  

1W-H0-05K

Price: $20.17 each.  

Demiurg 1W-H0-05 M12 and 1W-H0-05K M12

Demiurg 1W-H0-05 M12 and 1W-H0-05K M12

  • The data read from a transponder is sent via 1-Wire interface emulating Maxim (Dallas) DS1990A.
  • Mounted bicolor LED (red/green): 1W-H0-05 M12, common anode; 1W-H0-05K M12, common cathode.
  • Low case with M12 thread.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.

Demiurg product datasheet (PDF)
Demiurg product datasheet (PDF)

1W-H0-05 M12

Price: $20.17 each.  

1W-H0-05K M12

Price: $20.17 each.  

Demiurg RS-H0-05 and RS-H0-05K

Demiurg RS-H0-05 and RS-H0-05K

  • The data read from a transponder is transferred with RS-232 TTL interface. Standard transmission speed is 4800 bps. Modification to 9600 bps is available by special request. Contact us for more information.
  • Mounted bicolor LED (red/green): RS-H0-05, common anode; RS-H0-05K, common cathode.
  • Designed to be mounted with glue.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.
  • Low case.

Demiurg product datasheet (PDF)
Demiurg product datasheet (PDF)

RS-H0-05

Price: $20.17 each.  

RS-H0-05K

Price: $20.17 each.  

Demiurg RS-H0-05 M12 and RS-H0-05K M12

Demiurg RS-H0-05 M12 and RS-H0-05K M12

  • The data read from a transponder is transferred with RS-232 TTL interface. Standard transmission speed is 4800 bps. Modification to 9600 bps is available by special request. Contact us for more information.
  • Mounted bicolor LED (red/green): RS-H0-05 M12, common anode; RS-H0-05K M12, common cathode.
  • Low case with M12 thread.
  • Standard cable length: 15.75 inches (40 cm), 5 wires.

Demiurg product datasheet (PDF)
Demiurg product datasheet (PDF)

RS-H0-05 M12

Price: $20.17 each.  

RS-H0-05K M12

Price: $20.17 each.  

Important information

Payment Options: We accept Visa, MasterCard, American Express, Discover Card and PayPal. To order our products COD, we require a certified check and a $12 fee. Please contact us for details.

Privacy: We take your privacy seriously. We will never sell or share any of the information you provide to us, and we use secure servers to handle our online purchases.

TimePilot Corporation warranty*: TimePilot offers a lifetime warranty on iButtons and iButton Fobs and a 1-year warranty on iButton Probes and RFID Readers. The purchaser pays only the shipping to return the malfunctioning part to us.

Return policy*: If you are dissatisfied for any reason during the first 30 days after you purchase iButtons, iButton Fobs or iButton probes sold on the iButtonSource.com web site, TimePilot Corporation will refund the purchase price if you return them to us, freight prepaid and insured for the value of the product. If you choose this option, we hope that you will take a few minutes to help us understand why. Please be sure to contact us for an RMA (Return Merchandise Authorization) number before returning the product.

*Note: The money-back guarantee and warranty are void if the product is returned in a damaged state for any reason, including damage that occurs because of failure to follow installation instructions.